Enershield™-HP (High Permeability)
|
|
ENERSHIELD™-HP is a one component fluid-applied vapor permeable air/ water-resistive barrier. This resilient waterproof coating may be
roller-, brush-, trowel-, or spray-applied directly to approved wall substrates. It provides excellent secondary moisture protection to BASF Wall Systems and most other wall claddings.
|
|
| Features |
Benefits |
| Liquid-applied, continuous membrane |
Eliminates seams, lap joints and staples; transmits wind load directly to the substrate |
| Meets ASTM E2357, ICC-ES AC212 and ICC-ES AC148 requirements |
Fully qualified as an air/water-resistive barrier and flexible flashing material |
| Approved for use under most wall claddings on mixed-cladding buildings |
Provides a seamless air and water-resistive barrier |
| Compatible with BASF adhesives |
Approved for BASF adhesively-attached Water-Drainage EIFS |
| Spray-, roller-, trowel- or brush-applied |
Applicator friendly; quick application |
| ABAA approved |
Meets ABAA specifications |
| Water based |
Safe for workers and environment; easy to clean up |
|
|
| Uses |
ENERSHIELD™-HP is used as an air/water-resistive barrier over the following exterior wall substrates:
- PermaBase™ brand cement board (or other ASTM C1325 Type A Exterior approved cement boards)
- e²XP™ by National Gypsum, GlasRoc® by Certainteed and DensGlass™ exterior sheathing (ASTM C1177)
- Gypsum sheathing (ASTM C79/C1396)
- New and untreated Exposure 1 or exterior plywood sheathing (Grade C-D or better)
- Exposure 1 OSB
- Poured concrete/unit masonry
|
| ENERSHIELD™-HP complies with the air barrier impermeability requirements of the Massachusetts Energy Code. |
| ENERSHIELD™-HP should not be used for below grade applications or on surfaces subject to water immersion. |
|